Web
Analytics


[Solved] Boot Device Not Found HP (Step-Wise Guide)

Boot device not found HP” is one of the most common errors that occur due to many reasons without any prior notice. But thankfully, it can be solved by using a few solutions.

When the hard disk does not support the system boot process, then this error message constantly shows up on the screen. At the time of booting, the OS loads into RAM. To complete the task, a setup process starts and the BIOS takes charge.

But while the hard drive is not accessible, this error message pops up on the display leaving you puzzled. It is quite hard to detect this error at the preliminary stages.

If you are also suffering from the same problem, then follow the entire guide and implement the steps stated here one by one.

Causes Behind Boot Device Not Found Issue:

There are ample reasons for what you might get “No boot device found Windows 10” message on the display. At first, you have to know the reasons and then move on to the solution section.

How to Solve Boot Device not Found Issue? Stepwise Instructions

This issue can occur in your HP devices, be it Envy or any other model. To get rid of the issue, perform the methods stated here.

Solution 1: Perform a Hard Reset

Performing a hard reset re-creates the connection between the hardware and the BIOS. The hard reset process is quite easy and fixes the issue immediately.

The very first thing that you have to do is to power off your device by clicking on the “Shutdown” option. After that, unplug your device from any docking station. Also, detach the AC adaptor from the device.

Now, check that no external devices are connected to your PC. Now, you have to press the Power key for almost ten to fifteen seconds. It will help you to drain out the remaining charge from your device. After a few moments, power on your device. 

Once the Startup option appears on the display, hover the mouse and choose the Start icon. Click the Enter button to turn on your device.

Solution 2: Restore BIOS Default Settings

Seldom, the computer is configured to boot from an unbootable disk. In that situation, you have to restore BIOS default settings to solve the boot device not found on your HP device. Go through the tricks stated here.

  1. At first, you have to press the Start button and then repeatedly press the F10 button on your keyboard. It will enter you into the BIOS Setup menu.
  2. After that, click on the F9 button to restore the BIOS Setup Default settings.
  3. Once the page gets loaded completely, you have to click on the F10 button a few times.
  4. Now, click on Save and exit from the page.
  5. If you are asked to give permission, then click on Yes and press the Enter button.
  6. Follow the instructions shown on the screen. Once the entire process completes, restart your device to check the status of the issue.

Solution 3: Reset Hard Drive

If there is any loose connection problem, then users may also face the same problem. In those instances, resetting the hard drive is the ultimate fix to get rid of the error.

First of all, you have to click the Power button for fifteen to twenty seconds. Once your computer turns off, then release the key.

After that, detach the power cable and also reinsert the hard drive. Be careful while you are removing the hard drive from your computer. Finally, turn on your computer and check if the same problem is still occurring or not.

Solution 4: Rebuild the BCD Files

Sometimes, rebuilding the BCD configuration files can fix the “Boot device not found” problem from your device. Here are the steps:

bootrec /FixMbr

bootrec /FixBoot

bootrec /ScanOS

bootrec /RebuildBcd

Solution 5: Set System Partition to Active

If none of the above solutions are helpful to you, then set the System Partition to active. Once you have performed the steps, you will no longer receive the error message on your device.

To do so, at first, boot your device using the bootable Windows 10 USB drive.

After that, tap on the Next icon and the Welcome Screen will appear. Now, choose the Repair your Computer icon located at the bottom left of the display. Select the Troubleshoot option and then click on the Advanced icon.

Then, open the Command Prompt and write down “diskpart” in the box. Press Enter to open the Diskpart Utility. From there, you have to select the primary disk. After that, write “select disk number” and press Enter. You will see all the listed disk by entering this command.

Then, type “list disk”, “select disk number”, “select partition number”. Finally, write down, “Active” and click on the Enter button. The problem might get fixed now.

This hard drive error can turn your device into a useless one. But whenever you get the same problem do not get panicked. Just go through the article first to last. By implementing these solutions, you can solve the issue on your own. However, if any further issue arises in your mind, then connect with us in order to get more advanced fixes.

Show Buttons
Hide Buttons