Category Archives: HP Computer Support

15Jan/20

How To Scan From HP Printer to Computer (Step-Wise Guide)

HP Computer Support

HP printers are considered for heavy-duty work as they are designed to perform a variety of tasks such as Printing, Scanning, Faxing, etc. Among the lot, HP Envy 4500 is highly recommendable that allows you to scan from anywhere in the house.

But, if you are also facing issues while scanning a document from your HP Envy 4500 Printer on your computer then you can follow the given steps. This will ensure to resolve your hp scan to computer issues permanently.

Install HP software in your Computer

HP scanners are capable of reading any type of 2D images including any picture or even hand-made drawings. If you want to scan those images and send it to any connected device such as your computer then you need to install the HP software. 

To install it, follow the instructions given below:

  1. Visit HP’s official website and then go to the HP Scan and Capture option for installing it on your computer.
  2. Double-click on the downloaded file and click on “Run” to install the software on your PC.
  3. Wait for the installation to complete, once it completes you just need to launch the app.

5 Steps to HP Envy 4500 Scan to Computer

Now, simply follow these steps to learn how to scan any document using the HP Envy 4500 all-in-one printer.

Step 1

First switch on your HP printer. After that place a blank sheet in the insert tray of the Printer. Check whether the toner cartridge and ink are in their respective places or not. Also, make sure that both of them are installed correctly.

Step 2

Now, insert the photo or the document you want to scan. Put the page, facing downwards, on the glass scanner. The page should be placed in such a way that the edges of the page touch the side of the glass scanner. And, the arrows should be pointing towards it.

Step 3

Next, run the HP Scan and Capture software which you have installed previously. Click on the Settings tab and then choose the Select Device option. Select the HP printer which is connected to your computer.

Step 4

Select either the Document scan (If you want to scan any document) or Photo scan (If you have inserted any picture) options, according to your requirement, under the Settings tab.

Step 5

The entire scanning process may take some time to complete. Wait for its completion and then proceed by clicking the Save button. After the document or the image is scanned completely, save the file in the drive, by hitting the “Save As” tab.

These are the steps to scan any document or image using your HP Envy 4500 scanner to the computer. This is the easiest method and you will not face any trouble while scanning any file. 

 

01Sep/18

How to Solve HP Windows 10 Computer Not Starting Issue?

HP Computer Support, , , ,

HP computer devices are well organized with high end software and configuration system to perform the task easily. It can be used for long time if users are aware about it settings and usability of the system. To use it without any interruption users may need to install the operating system, other software and configure all the key settings.

It has various components and hardware configuration that can raise some issues like Computer Setup & Configuration, Drivers Installation error, Windows Operating System Issues, Drivers Update problem, Scan or Remove Virus and Malware, PC Optimization and Tune-up concern, Data Backup and Restore problem and HP laptop not starting after windows 10 update errors. Some users also face the issues as HP computer not starting windows, so they can contact for HP Tech Support offering their services in Australia regions.

So, the customers looking for such type of help to get their HP laptops not starting windows 10, they can either go with the steps or can get in touch with the best tech support service provider.

Procedures to troubleshoot Windows 10 Computer not starting problem:

Method 1: Disconnect non-essential devices

Step 1: Remove any discs and devices except mouse, keyboard, and monitor.

Step 2: Firstly, turn off the computers and remove all the devices attached

Step 3: Then turn on the computer

  • If the computer starts, reconnect the unplugged devices and then try to restart the computer again top find which device is creating error.
  • And if the computer does not start and same problem seems, turn off the computer with holding power button.

Method 2: Perform “Hard Reset”

Step 1: Now, disconnect the power cord from the PC and press the power button for 5 seconds and the power light indicator will be on.

Step 2: After this, reconnect the power cord again and turn the computer ON.

  • Check whether the problem is resolved or the same problem exhibits. If the same concern seen then try the troubleshooting.

Method 3: Reinstall Windows using “Refresh your PC”

Step 1: Visit at Choose an option window, and click on “Troubleshoot” option.

Step 2: After this click on “Refresh your PC” option and then click on “Next”.

Step 3: Wait for the Windows process and follow the prompts shown on the screen.

Step 4: Again move on to choose an option screen to click over the “Troubleshoot” menu.

Step 5: Now, the users may click “Reset your PC” option and then hit “Next” button.

Step 6: At last, remove personal files and wait for the Windows complete process

Get instant solution Call now +1-855-969-3589 HP Computer Customer Support Number

For any type of technical solutions the customers are required to dial the HP support phone number +1-855-969-3589 to get in touch with the technicians certified in tech support. They handle the issue via online mode for HP computer not turning on issues. This service is available 24*7 without any stop.