Fixed: HP Laptop Plugged In Not Charging Issue [Updated Guide]

Fix HP Errors

HP Laptop Plugged In Not Charging

There is no doubt that HP has implanted its name throughout the industry for its impressive laptops. However, sometimes user confronts a situation where their HP laptop is plugged in but not charging.

Although the causes behind such an issue can be numerous, there are several ways to get rid of it as well. To know more about it, take a thorough look further into this guide. 

Why is My Hp Laptop Plugged in but Not Charging?

To solve this problem, you will need to understand what is causing the problem in the first place. Hence, we have mentioned some of the probable causes that might be responsible for such a situation.

  • Use of surge protector
  • Corrupted AC adapter
  • Excessive accumulation of laptop memory
  • Outdated or incorrect battery device driver
  • Faulty BIOS Settings
  • Loose DC Jack
  • New charging system 

What To Do if HP Laptop is Plugged in But Not Charging?

Disconnect the charger from the laptop and reconnect it first then check if the issue gets resolved or not. However, if it persists, try other solutions listed below and check which one works best for you.

Solution 1: Perform a Power Reset

Perform a power reset on your laptop to clear your laptop memory and check if the issue resolves or not.

  • Shut down your laptop and remove the laptop battery (if possible).
  • Now, disconnect the power cable from the laptop. Press and hold the power button for around 15 seconds and release the button gradually.
  • Implant the battery again and reconnect the power cable with the laptop. Turn on the laptop and see the battery life. 

Solution 2: Update Battery Driver

As mentioned earlier, you can also confront this issue if the battery driver is outdated. Hence, try updating the battery driver by implementing the steps provided below.

  • Go to Start and then type “Device Manager” within the search bar. 
  • Search for Batteries and then press the + button. Now, right-click on  “Microsoft ACPI Compliant Control Method Battery” and then press the Update Driver Software button. 
  • Click on “Search automatically for updated driver software” so that Windows can do the same for you. 
  • Restart your laptop so that the battery gets installed again. Check if the issue resolves after this or not.

Solution 3: Update the HP Laptop BIOS

You can also try updating the BIOS for your HP laptop. As mentioned earlier, this problem can occur due to any corrupted or faulty BIOS settings. You can just navigate to the official website of HP and download the latest BIOS update for your HP laptop then. 

Make sure to do so under extra surveillance and take assistance from a professional before beginning the update. 

Alternatively, you can perform the BIOS update through the device manager, by following the steps cited below.

  • Go to Start and then type “Device Manager” within the search bar.
  • Click on Firmware and expand it. Double click on System Firmware and then click on the Driver tab.
  • Again, click on Update Driver and then “Search automatically for updated driver software”.
  • Once the update gets downloaded successfully follow the prompts appearing on your screen.

Solution 3: Check Your Hardware

Many a time, the problem can be related to the power cable or AC adapter of the laptop. Hence, make sure to check it as well. Make sure you are not using any surge protector and the laptop is connected to a socket. 

Likewise, also perform a proper analysis of the AC adapter and see if it is corrupted or not. Replace it with a new one if such is the case. 

Solution 4: Check for Problems in Charger

The problem can also result due to problems with the charger or its pin. If you see that the charger pin is bent on one side, then there are chances that the issue is caused because of that. Hence, for such scenarios, it is recommended to follow the steps cited below.

Remove the charger adapter from the power outlet and check the other side of the charger to see if the pin is bent or not. If it is actually bent, then try to center it. It is important that you do so carefully so that it doesn’t break. 

If none of the solutions work for you then try checking the DC power jack and see if it is loose. You can simply replace it with a new one if it connects loosely. However, if the problem still persists, replace the charger with a new one. 

These were some of the solutions following which you will be able to resolve the issue where your HP laptop is plugged in but not charging.